Serving Denver and the Denver metro since 2007
Licensed & InsuredFree EstimatesMon-Fri 7am-5pm
(720) 953-6574 Licensed & Insured
Get a Free Floor Estimate
Garage Floor Epoxy Coating in Denver, CO

Garage Floor Epoxy Coating in Denver, CO

Denver Superior Epoxy Flooring offers professional garage floor epoxy coating in Denver, CO, with 5,200+ floors coated since 2007. Every garage is diamond ground to an ICRI CSP 2-3 profile, cracks are chased and filled, and a 10 to 12 mil base coat of 100% solids epoxy goes down. We finish with full-broadcast vinyl flake and a polyaspartic topcoat, so a one- or two-car garage is usually done in 1 day.

This is an epoxy garage floor built for how garages get used here. Think hot tires off the highway, slush dripping from the wheel wells and a door that lets the sun in every afternoon. Stem walls, the door threshold and floor drains get coated in the same visit. A two-car garage runs $2,800 to $4,300, and you can park on it in 24 hours.

Get a FREE Estimate

Or call (720) 953-6574

  • Ground to CSP 2-3, never acid etched
  • Park in 24 hours, not 5 to 7 days
  • 15-year warranty that names hot-tire pickup
  • Stem walls and drains coated the same day

Garage Floor Epoxy Coating Systems

Four systems cover almost every garage we see. The grinding and crack repair underneath is identical for all of them.

Full-Broadcast Flake Garage Floors

Full-Broadcast Flake Garage Floors

Our most common garage system: base coat, 1/4 inch vinyl flake to full coverage and a polyaspartic topcoat, building to 25 to 30 mils. It hides tire marks and old oil shadows and gives your shoes grip on wet snowmelt. Pricing runs $6.50 to $9.00 per sq ft.

Solid-Color Epoxy Garage Floors

Solid-Color Epoxy Garage Floors

A single gray, tan or charcoal epoxy under a clear polyaspartic top. Hobby mechanics like it because a dropped socket is easy to spot. It shows dust and scuffs more than flake does, and runs $5.00 to $7.00 per sq ft.

Quartz Broadcast Garage Floors

Quartz Broadcast Garage Floors

Colored quartz sand broadcast into epoxy leaves a firm, sandpaper-like texture. We use it where grip matters more than looks, like a garage that doubles as a dog wash or a ramp down to a shop. With a polyaspartic topcoat it carries the same 15-year residential warranty.

Garage Stem Wall and Threshold Coating

Garage Stem Wall and Threshold Coating

The short concrete curb around most metro garages, usually 4 to 8 inches tall, takes the worst of the salt splash. We grind and coat it in the same system as the floor for $9 to $14 per linear ft. A spalled threshold at the door gets patched before anything is coated.

Garage Floor Coating Over a Failed Kit

Garage Floor Coating Over a Failed Kit

If a peeling kit is on the slab now, it comes off first, adding $1.50 to $3.00 per sq ft. We never coat over a failed coating. The new system goes onto bare, ground concrete and gets the full warranty.

Before and After

Dusty garage floor with oil stains, paint drips and a cracked joint in a Denver home
Same garage with a glossy solid gray epoxy floor and a thin flake border
Typical before and after: a stained, cracked garage floor diamond ground and coated in solid gray epoxy with a flake border
Garage floor edge scaled and pitted by deicing salt and freeze-thaw in Denver, CO
Same garage floor edge patched and coated with a glossy full-broadcast flake epoxy
Typical before and after: a salt-scaled garage door edge patched flush and coated with flake epoxy

What a Denver Garage Does to a Floor Coating

A garage floor here takes a different beating than a basement or a kitchen. Three things do most of the damage, and our garage system is built around all three.

Hot Tires and Plasticizers

Tires come off I-25 or C-470 hot. The heat softens a thin coating while the rubber's plasticizers grab it, and when you back out the next morning the coating leaves with the tires. A thick 100% solids base and a hard polyaspartic top resist it, and our warranty covers hot-tire pickup by name.

Magnesium Chloride and Snowmelt

Road deicer rides in on the wheel wells and melts on the slab. On bare concrete it soaks in and scales the surface right where the car drips. On a coated floor it dries as a white film you can rinse off with a hose and a pH-neutral cleaner.

Sun Through the Open Door

Afternoon sun at 5,280 feet hits the front of the slab every time the door's up. Epoxy-only floors turn amber there first, leaving a stripe you can see from the street. A UV-stable polyaspartic topcoat keeps the color even from the door to the back wall.

Garage Slab Problems We Fix Before Coating

Most metro garage slabs have some damage by the time we see them. Fixing it is part of the job, and most of it is already in the price.

Shrinkage cracks get chased with a grinder, filled with a rigid repair compound and ground flush. Control joints are your call: we can fill them for a cleaner look or keep them open so the slab moves where it was designed to.

Spalling from freeze-thaw shows up as popped, flaky concrete near the door. Light spalling is handled in standard prep, and heavy spalling is patched at $6 to $12 per sq ft of damaged area. If a crack is still opening, or one side sits higher than the other, we'll tell you to get the slab looked at before you pay for a coating.

Garage Floor Epoxy Prices by Garage Size

Pricing is per square foot and written at the estimate. A one-car garage, about 250 sq ft, runs $1,800 to $2,600. A two-car garage, about 400 to 480 sq ft, runs $2,800 to $4,300. A three-car garage, about 600 to 700 sq ft, runs $4,000 to $5,900 and takes 2 days.

Grinding, crack repair, flake and topcoat are inside those numbers. Stem walls, old coating removal and heavy spall repair are the only extras, and they're listed on the quote before you sign anything.

How We Coat a Garage Floor in 1 Day

  1. Clear and Protect

    You empty the slab the day before. The crew tapes the drywall line, protects the door seal and sets up dust extraction before the first grinder starts.

  2. Grind and Repair

    Walk-behind grinders take the slab to CSP 2-3, hand grinders get the edges, then cracks are chased and filled, spalls patched and the floor vacuumed.

  3. Base Coat and Flake

    The 100% solids epoxy base goes down at 10 to 12 mils, and 1/4 inch flake is broadcast until the floor won't take any more.

  4. Scrape and Topcoat

    Once the base has cured, the crew scrapes and vacuums the loose flake, then rolls the polyaspartic topcoat at 8 to 10 mils.

  5. Walk It and Wait

    You walk the floor with the crew lead. Foot traffic is fine in 4 to 6 hours, cars in 24 hours, and full chemical cure takes 7 days.

Garage Floor Epoxy Questions

How soon can I park on a new garage floor?

With a polyaspartic topcoat, 24 hours. An epoxy-only floor needs 5 to 7 days before a car goes on it. Either way, hold off on harsh cleaners and standing chemicals until the 7-day full cure.

Will mag chloride from the roads hurt the coating?

No. A cured coating keeps it on the surface instead of letting it soak into the concrete. Hose the floor with a pH-neutral cleaner a couple of times a winter and the white film comes off.

Do you coat the stem walls too?

Yes, we can do that. Most metro garage stem walls are 4 to 8 inches tall. We coat them using the same system as your floor for $9 to $14 per linear foot.

Can you coat a garage floor that has cracks?

Yes. We include crack chasing and filling in every garage job. We won't coat over a crack if the slab is actively heaving or moving, though. A coating can't fix a moving slab.

Is it worth coating the garage if I might sell in a few years?

Our 15-year residential warranty transfers to the next owner, which is a real selling point. If you're listing next week, though, a degreaser and a pressure wash might be all you need, and we'll tell you that.

Book a Garage Floor Epoxy Estimate

Call (720) 953-6574 and Kyle will come measure, check the slab and leave flake samples overnight. You'll have a written price within the same visit, and most garages are booked 2 to 3 weeks out.