Serving Denver and the Denver metro since 2007
Licensed & InsuredFree EstimatesMon-Fri 7am-5pm
(720) 953-6574 Licensed & Insured
Get a Free Floor Estimate
Epoxy Flooring in Denver, CO

Denver Superior Epoxy Flooring | Epoxy Garage Floors, Flake Coatings, Polished Concrete & Repair for Residential & Commercial

Denver Superior Epoxy Flooring installs epoxy flooring, garage floor coatings, metallic epoxy and polished concrete across Denver, CO. Owner Kyle Brandt has run the company since 2007, and our crews have coated 5,200+ floors. Every slab is diamond ground to an ICRI CSP 2-3 profile, then gets a 10 to 12 mil base coat of 100% solids epoxy. Full-broadcast vinyl flake and a UV-stable polyaspartic topcoat let us finish most garages in 1 day.

Already have a coating that's peeling or showing hot-tire pickup? We repair and recoat failed floors, grind off box-store kits, and patch the spalls and cracks that freeze-thaw and magnesium chloride leave behind. Colorado has no statewide contractor licence, so we're licensed where each city requires it and fully insured, with general liability and workers' compensation on every crew. Your quote is written per square foot, and moisture testing and crack repair are included free.

Get a FREE Estimate

Or call (720) 953-6574

Why Homeowners Pick Us as Their Denver Epoxy Flooring Contractors

Coating Denver Floors Since 2007, Licensed & Insured

We've finished 5,200+ floors. Kyle Brandt still handles most of our estimates himself.

Owner-Run Pricing, No Franchise Sales Office Markup

You'll get a written per-square-foot price at your estimate from the guy who stands behind the work.

Free Moisture Testing and Crack Repair on Every Quote

Basements and on-grade slabs get a calcium chloride or RH probe test before we price any primer.

One-Day Garages, Booked 2 to 3 Weeks Out

Park in 24 hours on a polyaspartic topcoat, and rush jobs go in within 7 days when a crew opens up.

100% Solids Epoxy and Polyaspartic, Not a Water-Based Kit

Our base coat alone runs 10 to 12 mils, where a box-store kit dries at 2 to 3 mils.

Residential Epoxy Floor Coating Services

Garages are most of our work, but the same grinders and resins go into basements, shops, patios and living spaces. Here's what we install for homeowners.

Epoxy Garage Floor Coating

Epoxy Garage Floor Coating

We grind, fill cracks, coat the stem walls if you want them done, and finish with a topcoat that handles hot tires and road slush. A two-car garage runs $2,800 to $4,300 and is usually done in 1 day.

Flake Epoxy Floors

Flake Epoxy Floors

Full-broadcast vinyl flake hides old stains, adds grip when snowmelt puddles under the car and locks the topcoat in place. We use 1/4 inch flake as standard, with 1/8 inch and 1/16 inch for a finer look. The sample boards stay with you overnight.

Polyaspartic and Polyurea Floor Coatings

Polyaspartic and Polyurea Floor Coatings

Polyaspartic is a polyurea that cures fast and stays UV stable, so it won't amber the way epoxy does in Colorado sun. We roll it at 8 to 10 mils over the base coat. Walk on it in 4 to 6 hours and park in 24 hours.

Metallic Epoxy Floors

Metallic Epoxy Floors

Metallic epoxy suspends mica pigment in clear 100% solids resin, worked by hand into swirls no two floors share. It suits basements, bars and offices better than working garages. Plan on a 3-day install at $9 to $14 per sq ft.

Basement Floor Epoxy

Basement Floor Epoxy

Below-grade slabs push moisture, so every basement gets a free calcium chloride or RH probe test first. Over our 3 lbs per 1,000 sq ft per 24 hours limit, we switch to a moisture-mitigating primer. Basement systems carry a 10-year warranty.

Polished Concrete Floors

Polished Concrete Floors

We grind with metal-bond diamonds, harden the slab with lithium silicate densifier and polish to 800, 1,500 or 3,000 grit depending on the sheen you want. Nothing sits on top to peel. Pricing runs $4 to $9 per sq ft.

Stained Concrete Floors

Stained Concrete Floors

Acid stain reacts with the lime in concrete for mottled browns and ambers, and water-based stain gives more even, modern color. Both get a sealer on top. Most stained floors take 2 to 3 days at $3.50 to $7 per sq ft.

Patio, Porch and Pool Deck Coatings

Patio, Porch and Pool Deck Coatings

Outdoor slabs get a UV-stable polyaspartic with grit in the topcoat, never straight epoxy, because high-altitude sun yellows epoxy fast. We patch freeze-thaw spalls first. Outdoor coatings carry a 5-year warranty against peeling and UV yellowing.

Solid-Color Epoxy for Workshops and Utility Rooms

Solid-Color Epoxy for Workshops and Utility Rooms

A solid gray or tan epoxy with a polyaspartic top is the working-floor option for shops, laundry rooms and storage areas. It sweeps clean and makes a dropped screw easy to find. Expect $5.00 to $7.00 per sq ft.

Before and After

Bare garage floor with oil stains, salt rings and scaling in a Denver bi-level home
Same garage with a glossy full-broadcast flake epoxy floor and clear topcoat
Typical before and after: a salt-stained, scaling garage slab ground, patched and coated with full-broadcast flake epoxy
Bare basement concrete with carpet glue residue and tack strip holes in a Denver home
Same basement with a glossy silver gray metallic epoxy floor reflecting the lights
Typical before and after: a glue-stained basement slab ground smooth and poured with a silver gray metallic epoxy floor
Spalled, cracked concrete patio with rust stains behind a Denver bi-level home
Same patio with a textured, slip-resistant flake polyaspartic coating
Typical before and after: a spalled patio slab patched and coated with a slip-resistant UV-stable polyaspartic finish

Commercial Epoxy Flooring Contractors for Denver Businesses

Commercial floors get a system picked for the traffic, the chemicals and how long you can close.

Restaurants and Commercial Kitchens

Hot-water washdowns crack standard epoxy, so kitchens get urethane cement at 3/16 to 1/4 inch with a 4 inch or 6 inch integral cove base. We schedule it over a 2-day closure, and full service resumes 24 hours after the last coat.

Warehouses and Distribution Floors

Forklift aisles get high-build epoxy at 20 to 30 mils, or epoxy mortar at 1/4 inch where hard wheels turn. Safety line striping runs $1.50 to $3.00 per linear ft so permanent aisles stay marked.

Retail Stores, Showrooms and Offices

Polished concrete is the low-maintenance pick for open sales floors and lobbies, at $4 to $9 per sq ft. Metallic epoxy works where a brand wants a floor customers remember.

Clinics, Dental and Veterinary Offices

Exam rooms and kennels need a floor that takes disinfectant daily with no seams for fluids to sit in. Quartz broadcast at about 1/8 inch thick with a cove base handles it, at $7 to $12 per sq ft.

Auto Repair Shops and Service Bays

Oil, brake fluid and hot tires are the daily load in a service bay. We grind to CSP 2-3, build the epoxy thick and finish with a chemical-resistant topcoat. Commercial systems carry a 5-year warranty.

Specialty Floor Repair and Slab Prep Services

Some jobs start with fixing what's already there.

Epoxy Floor Repair and Recoating

If the old coating is still bonded, we screen it and recoat. If it's peeling, we grind it off for an added $1.50 to $3.00 per sq ft and start from bare concrete with the full 15-year garage warranty.

Moisture Testing and Vapor Mitigation

We run ASTM F1869 calcium chloride tests over 60 to 72 hours or ASTM F2170 RH probes over 24 hours. When a slab reads high, a moisture-mitigating epoxy primer adds $2.00 to $3.50 per sq ft and stops blistering before it starts.

Crack, Spall and Freeze-Thaw Repair

Crack chasing and filling is part of every job. Heavy spalling from freeze-thaw and mag chloride gets patched at $6 to $12 per sq ft of damaged area, so the coating sits on solid concrete.

Flake Borders and Custom Color Layouts

We can lay a contrasting flake border, a solid-color walkway or a simple two-tone layout into a garage floor. On most garages it still fits inside the 1 day install.

Why We're the Best Epoxy Flooring Contractor in Denver

A floor coating is only as good as the slab under it and the bond between them. Most of what separates a 15-year floor from one that peels the first summer happens before any color goes down: the grind, the moisture test and the crack repair.

Here's how we build ours, what we put in it, and what Denver slabs throw at a coating.

How a One-Day Garage Floor Goes Down

  1. Free Estimate and Slab Check

    Kyle measures the floor, checks hardness and any old coating, and sets up a moisture test where the slab needs one. The visit takes about 45 minutes.

  2. Written Quote and Flake Pick

    You get a per-square-foot price in writing, and the flake samples stay with you overnight. A 20% deposit holds an install date 2 to 3 weeks out.

  3. Grind, Repair and Vacuum

    The crew diamond grinds to CSP 2-3, chases and fills cracks, patches spalls and vacuums the slab clean with dust extraction running the whole time.

  4. Base Coat, Flake and Topcoat

    A 10 to 12 mil base coat of 100% solids epoxy goes down, flake is broadcast to full coverage, scraped and vacuumed, then polyaspartic is rolled at 8 to 10 mils.

  5. Walkthrough and Written Warranty

    The crew lead walks the floor with you, goes over cure times and hands you the warranty. Walk on it in 4 to 6 hours and park in 24 hours.

Diamond Grinding to an ICRI CSP 2-3 Profile

The International Concrete Repair Institute rates concrete texture on a CSP scale, and coatings like ours bond best at CSP 2-3. Think medium sandpaper. Acid etching, the method printed on most kit boxes, only reaches about CSP 1 and leaves residue in the pores.

We run walk-behind diamond grinders with dust extraction, then hand grinders along walls and around floor drains. Grinding also cuts off the weak top layer, old sealers and tire stains that would block the bond.

Diamond Grinding to an ICRI CSP 2-3 Profile

Moisture Vapor Testing With ASTM F1869 and F2170

Concrete breathes. Water vapor moves up through a slab, and if it moves faster than a coating can handle, the coating blisters or lets go. Basements and on-grade slabs are where it shows up.

We test before we price a primer. A calcium chloride test under ASTM F1869 sits 60 to 72 hours, and in-situ RH probes under ASTM F2170 sit 24 hours. Over 3 lbs per 1,000 sq ft per 24 hours, or over 80% RH, we switch to a moisture-mitigating epoxy primer.

100% Solids Epoxy Instead of Water-Based Kits

A water-based kit carries a lot of water that evaporates as it cures. What's left on the floor is 2 to 3 mils dry. Our base coat is 100% solids epoxy, so the 10 to 12 mils we roll is what stays.

Thickness is what keeps a dropped wrench from chipping through to concrete, and what keeps hot tires from pulling the coating loose. A full-broadcast flake system with its topcoat builds to 25 to 30 mils.

100% Solids Epoxy Instead of Water-Based Kits

Polyaspartic Topcoats for High-Altitude UV

Denver sits at 5,280 feet, and the thinner air lets more ultraviolet light through than at sea level. Standard epoxy is an aromatic resin, and UV turns it amber over time, worst near an open garage door or on a patio.

Polyaspartic is an aliphatic polyurea, so sunlight doesn't yellow it the same way. It stays clear, cures fast enough to finish a garage in 1 day, and at 8 to 10 mils it adds real scratch and chemical resistance.

Full-Broadcast Vinyl Flake

Full broadcast means flake goes into the wet base coat until it won't take any more. Once it cures, the crew scrapes off the loose flake and vacuums, leaving a dense layer with a light texture.

That texture earns its keep in a Denver garage. Snowmelt off a car turns a smooth glossy floor slick, and flake gives your shoes some grip. Partial broadcast saves a little on material and gives up most of that.

Full-Broadcast Vinyl Flake

Hot-Tire Pickup and Why Thin Coatings Fail

Tires heat up on the highway, and the rubber carries plasticizers. Park on a thin, soft coating and the heat softens it while the tread grips it. When you back out, the coating comes with you.

It's the failure we're called to fix most, and it nearly always traces back to a water-based kit over an acid-etched slab. A ground slab, a thick base coat and a hard polyaspartic topcoat stop it. Our 15-year residential warranty names hot-tire pickup specifically.

Magnesium Chloride and Winter Slush

Colorado road crews spread magnesium chloride to keep pavement clear. It rides home in your wheel wells, melts on the garage floor and soaks into bare concrete. Over a few winters it scales and pits the surface right where the car drips.

A coated slab keeps it on top, where a hose can move it. Rinse with a pH-neutral cleaner a couple of times a winter and the white film comes right off.

Magnesium Chloride and Winter Slush

Freeze-Thaw Spalling, Cracks and Front Range Soils

Water gets into the top of a slab, freezes, expands and pops the surface off. That's spalling, and it shows up first on garage aprons and the first few feet inside the door. We patch it before coating.

Expansive clay and claystone under much of the Front Range move slabs too. We chase and fill existing cracks on every job. If a slab is still heaving, we'll tell you to talk to a soils or foundation engineer before you spend money on a coating.

Written Warranties With Real Terms

Garage flake, solid-color and quartz systems with a polyaspartic topcoat carry a 15-year residential warranty against peeling, delamination and hot-tire pickup, and it transfers to the next owner if you sell. Metallic epoxy and basement systems get 10 years. Patios get 5 years against peeling and UV yellowing.

What isn't covered is written down too: impact damage, chemicals left standing on the floor, and new cracks from slab movement after install. We chase and fill those at our standard repair rate.

Written Warranties With Real Terms

Epoxy Flooring Cost in Denver

These are installed prices for the Denver metro in 2026. Grinding, crack repair and moisture testing are already inside them. Your written quote will land inside these ranges unless the slab needs heavy repair or old coating removal.

JobTypical rangeWhat drives the price
One-car garage, full flake system$1,800 to $2,600About 250 sq ft, done in 1 day
Two-car garage, full flake system$2,800 to $4,300About 400 to 480 sq ft, done in 1 day
Three-car garage, full flake system$4,000 to $5,900About 600 to 700 sq ft, done in 2 days
Solid-color epoxy with polyaspartic top$5.00 to $7.00 per sq ftShops, laundry and utility rooms
Metallic epoxy$9 to $14 per sq ft3-day install
Basement floor epoxy$5.50 to $8.50 per sq ftMoisture test included
Polished concrete$4 to $9 per sq ftDensified, polished to 800, 1,500 or 3,000 grit
Commercial urethane cement$10 to $16 per sq ftCove base priced per linear ft
Moisture-mitigating primeradd $2.00 to $3.50 per sq ftOnly when the slab tests high

Old coating removal adds $1.50 to $3.00 per sq ft. Stem walls run $9 to $14 per linear ft. The minimum for a full coating job is $1,500.

Epoxy Flooring Questions We Hear Most

How long does an epoxy garage floor last in Denver?

A ground slab with a 100% solids base coat and a polyaspartic topcoat is built to outlast our 15-year residential warranty with normal use. Kits rolled over acid-etched concrete often fail in the first hot summer. The difference is the bond and the thickness, not the color.

Are you searching for 'epoxy flooring near me'?

If you've been searching for epoxy flooring near me in Denver, CO, you've found the right team. Denver Superior Epoxy Flooring is a locally based epoxy flooring contractor serving Denver and the surrounding area. Call us at (720) 953-6574 or request a free quote. We call back within 2 business hours during open hours.

Is polyaspartic better than epoxy?

It works well as a topcoat because it's UV stable and scratch-resistant. It also lets us finish a garage in 1 day. We still use epoxy as a base coat because it wets into the ground concrete and builds thickness. Most of our floors use both.

Can you coat a garage floor in the winter?

Yes, our crews work year-round. Garages are enclosed, and we check slab temperature before we mix anything. If the slab is too cold for the resin to cure properly, we warm the space or move the date rather than gamble with your floor.

Do I need to empty the garage?

Yes. Move your cars, shelving, and boxes out the day before. You can leave wall-mounted cabinets as long as we have room to grind underneath them.

What if my slab has a moisture problem?

That's why we test first, for free. If the slab reads over our limits, a moisture-mitigating epoxy primer goes down before the base coat and adds $2.00 to $3.50 per sq ft. Skipping it is how basement floors blister.

Will the floor be slippery when it's wet?

Full-broadcast flake leaves a light texture that grips better than a smooth gloss. For ramps, steps and patios we add grit to the topcoat. Tell us where the snowmelt puddles and we'll plan the texture around it.

Do you do commercial floors?

Yes. We install urethane cement in kitchens, quartz broadcast in clinics, and high-build epoxy and striping in warehouses. We also do polished concrete for retail. Commercial systems include a 5-year warranty written for the specific job.

Our Epoxy Flooring Service Areas Around Denver

Denver Superior Epoxy Flooring serves surrounding areas to Denver, CO, including Aurora, Lakewood, Littleton, Centennial, Arvada, Westminster, Highlands Ranch and Parker.

Inside the city, a lot of our work is in older neighborhoods like Park Hill, Washington Park and the Highlands. Detached alley garages there sit on decades-old slabs that need patching before they're coated. Newer areas like Central Park and Green Valley Ranch have attached garages on younger concrete, which is usually a straight one-day job.

Commuters along I-25 and I-70 bring home the most magnesium chloride, and their garage aprons show it. On the south side, in Douglas County, swelling soils are worth a conversation before any basement floor goes down.

  • Denver, CO
  • Aurora, CO
  • Lakewood, CO
  • Littleton, CO
  • Centennial, CO
  • Arvada, CO
  • Westminster, CO
  • Highlands Ranch, CO
  • Parker, CO

Get a Written Quote From a Denver Epoxy Flooring Contractor

Call (720) 953-6574, Monday to Friday, 7am to 5pm. Kyle will schedule your free estimate within 3 business days. He'll test the slab and leave you a written price along with flake samples to keep overnight.