Serving Denver and the Denver metro since 2007
Licensed & InsuredFree EstimatesMon-Fri 7am-5pm
(720) 953-6574 Licensed & Insured
Get a Free Floor Estimate

Epoxy Flooring in Aurora, CO

Denver Superior Epoxy Flooring provides professional epoxy flooring in Aurora, CO. We install garage floor epoxy coatings, full-broadcast flake floors, polyaspartic topcoats, basement floor epoxy, metallic epoxy and polished concrete, and we repair and recoat failed floors. Every slab is diamond ground to an ICRI CSP 2-3 profile before a 100% solids epoxy base coat goes down.

Aurora is a big, spread-out city, and its floors show it. A garage in a north Aurora subdivision from the late 1970s needs different prep than one in a newer build on the south end. We price each one after testing the slab, not before.

Free Estimate in Aurora

Or call (720) 953-6574

Garages From Aurora's Subdivision Boom

Aurora was the fastest-growing city in the country in the late 1970s and early 1980s, and it grew one subdivision at a time. That means a lot of Aurora garage slabs date from that boom, and they've seen every winter since.

The usual list on those floors: shrinkage cracks running out from the corners and oil shadows where cars have parked for years. There's often a spalled strip just inside the door, too, where deicer and freeze-thaw have worked on the surface.

None of that stops a coating. We chase and fill the cracks, patch the spalls and grind the whole slab to CSP 2-3 so the epoxy bonds to sound concrete instead of a weak, contaminated top layer.

On a typical two-car garage of about 400 to 480 sq ft, a full-broadcast flake system runs $2,800 to $4,300. Heavy spall repair is the one extra we see often on older Aurora floors, at $6 to $12 per sq ft of damaged area.

Hail, Sun and Slush on the East Side

Summer hail is common out here, so plenty of Aurora homeowners stopped parking in the driveway years ago. A car that lives in the garage year-round brings in hot tires in July and wet slush in January, and the floor takes both.

That's why our garage system finishes with a polyaspartic topcoat at 8 to 10 mils. It resists hot-tire pickup, and the magnesium chloride that rides in on the wheel wells dries on top as a film you can hose away.

Elevation matters too. Aurora runs from 5,285 feet where Sand Creek leaves the city up to 6,229 feet on the southern edge, and sun through an open garage door at that height ambers plain epoxy fast. Polyaspartic stays clear.

Newer homes on the south side often have finished basements. Those get a free calcium chloride or RH probe test first, and a moisture-mitigating primer if the slab reads over 3 lbs per 1,000 sq ft per 24 hours or 80% RH.

Recent Epoxy Floor Work Around Aurora

Working Across Three Counties

Aurora spreads across Arapahoe, Adams and Douglas counties, and we work all of it, from the older neighborhoods near Colfax to the newest streets near the Douglas County line.

Some of the most varied work is on redeveloped land. Lowry Air Force Base closed in 1994 and became a master-planned neighborhood straddling the Aurora and Denver line, with newer attached garages that are usually a straight one-day flake job. The old Fitzsimons Army Hospital grounds are now the Anschutz Medical Campus, and the clinics and labs around it are the kind of space where we put quartz broadcast with a cove base.

Crews working in Aurora are often in Lakewood, CO later the same week, so scheduling across the metro is rarely a problem. Most residential installs are booked 2 to 3 weeks out, and rush jobs go in within 7 days when a crew opens up.

How an Aurora Floor Job Runs

Call and we'll set up a free estimate within 3 business days. Kyle measures the floor, checks for old coatings and spalling, and leaves flake samples with you overnight along with a written per-square-foot price.

On install day the crew grinds, repairs, lays the base and flake, then rolls the topcoat. Most one- and two-car garages are finished in 1 day. Foot traffic is fine after 4 to 6 hours, and the car can go back in after 24.

Colorado leaves contractor licensing to local governments, so we follow Aurora's requirements on any job that calls for them. Every crew carries general liability and workers' compensation, and garage systems come with our 15-year residential warranty against peeling, delamination and hot-tire pickup.

Epoxy Flooring Questions From Aurora Homeowners

Do you work in south Aurora as well as the older north side?

Yes. We cover all of Aurora across Arapahoe, Adams and Douglas counties. Older north-side slabs usually need more crack and spall repair, while newer south-side garages are often a straight one-day job.

My car comes in covered in melting hail or snow. Will the floor handle the water?

Yes. A full-broadcast flake system adds a light texture for better grip. The polyaspartic topcoat also handles standing water without a problem. We can add extra grit near your garage door if you deal with puddles there.

My Aurora house is brand new. Can you coat the garage now?

Yes, but only once the concrete is at least 28 days old. New slabs often have curing compounds or builder sealers on the surface. We grind down to a CSP 2-3 to strip that off so the coating actually bonds.

Do you install commercial floors in Aurora?

Yes. We install quartz broadcast and cove base in medical clinics and urethane cement in restaurant kitchens. We also use high-build epoxy for warehouses. These commercial floors include a 5-year warranty based on your specific usage.

How old is too old for an Aurora garage slab?

Age alone isn't the issue. A sound 1970s slab coats fine after grinding and repairs. What stops us is a slab that's still moving, and we'll tell you if we see signs of that.

Book an Aurora Epoxy Floor Estimate

Call us at (720) 953-6574. We take calls weekdays from 7am to 5pm. Kyle can usually get to your Aurora garage for an estimate within 3 business days.